fdfishman@watcgl.UUCP (02/19/87)
Hi, I am looking for some schematic capture/simulation software for a friend. I personally know of no software, but I am including his request. Can you advise me if there is any schematic capture with simulation software available for the Amiga? The simulation would ideally permit the generation of timing diagram displays as well as state table output. The schematic capture stuff is the computer supported generation of hardware schematics. This permits the designer to "define" a digital circuit. The simulation stuff permits that design to be tried in theory before the prototype is actually constructed. This is another example of CAD/CAM. The PCLO program is layout of the design on the board after successful prototyping. It is one step beyond the stage I'm interested in. I Have found one item of interest, see page 46 of the Jan. '87 Byte, the Logicworks program for the Mac. Thanks, Robert Henderson. You can e-mail me all comments and I will summarize the results to the net if there is enough interest. Thanks FDFISHMAN (Flynn D. Fishman) @ WATCGL UUCP : ...!{decvax|ihnp4|clyde|allegra|utzoo}!watmath!watcgl!fdfishman ARPA : fdfishman%watcgl%waterloo.csnet@csnet-relay.arpa CSNET : fdfishman%watcgl@waterloo.csnet -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This Cutsie saying space left intentionally left blank until such a time as 1) The above mentioned user can think of a cutsie saying 2) The above mentioned user with the aid of some friends can think of a cutsie saying. or 3) Sufficient time has passed such that plagerism of someone else's cutsie saying would not be noticed by many. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
miner@ulowell.UUCP (02/23/87)
In article <610@watcgl.UUCP> fdfishman@watcgl.UUCP (Flynn D. Fishman) writes: > I am looking for some schematic capture/simulation software for a friend. > I personally know of no software, but I am including his request. Soft Circuits the makers of PCLO are releasing to Beta testers a beta version of their schematic capture package. It will interface with the PCLO+ PCB software. It will not do simulation. They envision having a simulator package in the future, I would say at least a year away. -- Rich Miner !ulowell!miner Cntr for Productivity Enhancement 617-452-5000x2693