wilkes@beatnix.UUCP (02/23/87)
Seems like every time I run the shar program to unshar some wonderful thing from the net, the guru visits. Usually the Amiga croaks almost immediately when shar is run, but on a fresh boot, it seems like shar will run to completion one time, then the guru visits with the next program, whatever it happens to be. Almost always get a 4 in the left half of the guru number (illegal instruction) but the address varies some. This is with 1.2R, and workbench not loaded. If memory serves, this did not happen (at least not as consistently) with 1.2G and earlier. Certainly did not happen with 1.1. A colleague uses the RRD and has the same problem, but he always gets a 3 in the left half of the guru number. Oh yes, the shar program is whatever appeared in comp.sys.amiga some time ago, and was compiled with Lettuce 3.03 (or whatever the latest pre-3.10 version was). Any clues? Anyone else experienced this? Most important, anyone else fixed it? :-) ==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-== John Wilkes --- UUCP: {sun|styx}!elxsi!wilkes USPS: ELXSI Ltd., 2334 Lundy Pl., San Jose, CA 95131 BELL: (408) 942-0900 "I go on working for the same reason a hen goes on laying eggs." -H. L. Mencken