joels@tekred.UUCP (05/06/87)
I have had the Insider from Michigan Software for about 2 weeks. It took a week to arrive. It is a 1meg board with a smartwatch on it. It comes with 3 programs - clock read/set; memory test; RAM on/off. Installation instructions are detailed and easy to follow with drawings of all the connections. It is a pain to install because it is a tight fit. I worked carefully and it took about 2 hours including booting and testing before re-assembly. It came up and worked first time. It has worked with everything I have tried so far, but I rarely use commercial software. It has a 4 position dip switch that allows it to be installed into any of the 1 meg slots 2-9 or C. I installed it in the C slot and the Amiga recognized it there. Addmem is needed if any other slot is used. I tried it with a friend's C LTD 1 meg board and it worked. I have also carried my Amiga around in the trunk of my car and it has not loosened. The clock runs a little slow, but its not as far off as TIC. Joel Swank Tektronix, Redmond, Oregon