papa@uscacsc.UUCP (Marco Papa) (05/12/87)
I just got the Amiga Genlock. It comes with a demonstration disk that includes TitleCraft. It turns out that TitleCraft will run only under Workbench 1.1 and will Guru on WB 1.2. Interesting since the Genlock started shipping in the US AFTER 1.2 was released. Any update in the works from C-A? -- Marco -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Marco Papa 3175 S. Hoover St., Ste. 275 (213)669-1497 Los Angeles, CA 90007 USC: (213)743-3752 F E L S I N A Now working for ::::::: BIX: papa But in no way :: :: Officially representing ::::::: ...!oberon!uscacsc!papa S O F T W A R E papa@cse.usc.edu -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
grr@cbmvax.cbm.UUCP (George Robbins) (05/14/87)
In article <207@uscacsc.UUCP> papa@uscacsc.UUCP (Marco Papa) writes: > I just got the Amiga Genlock. It comes with a demonstration disk that > includes TitleCraft. It turns out that TitleCraft will run only under > Workbench 1.1 and will Guru on WB 1.2. Interesting since the Genlock > started shipping in the US AFTER 1.2 was released. Any update in the > works from C-A? Is it 1.2, or just a program that doesn't cope well with expansion? Carolyn or Phil? -- George Robbins - now working for, uucp: {ihnp4|seismo|rutgers}!cbmvax!grr but no way officially representing arpa: cbmvax!grr@seismo.css.GOV Commodore, Engineering Department fone: 215-431-9255 (only by moonlite)
eric@cbmvax.cbm.UUCP (Eric Cotton) (05/14/87)
In article <207@uscacsc.UUCP> papa@uscacsc.UUCP (Marco Papa) writes: >I just got the Amiga Genlock. It comes with a demonstration disk that >includes TitleCraft. It turns out that TitleCraft will run only under >Workbench 1.1 and will Guru on WB 1.2. Interesting since the Genlock >started shipping in the US AFTER 1.2 was released. Any update in the >works from C-A? TitleCraft V0.13 runs just fine on my A1000 running under KickStart V33.180 (1.2). I tried it with both 1/2M and 1M on board without any problem. Could you perhaps give further details on how to duplicate this bug? -- Eric Cotton Commodore-Amiga *======================================================================* *===== UUCP: {ihnp4|allegra|seismo}!cbmvax!eric =====* *===== FONE: (215) 431-9180 =====* *===== MAIL: 1200 Wilson Drive / West Chester, PA 19380 =====* *===== PAUL: "I don't find this stuff amusing anymore." =====* *======================================================================*
andy@cbmvax.cbm.UUCP (Andy Finkel) (05/14/87)
In article <207@uscacsc.UUCP> papa@uscacsc.UUCP (Marco Papa) writes: >includes TitleCraft. It turns out that TitleCraft will run only under >Workbench 1.1 and will Guru on WB 1.2. >-- Marco Are you by any chance running with overscan via morerows or a program like morerows ? This might cause a problem. -- andy finkel {ihnp4|seismo|allegra}!cbmvax!andy Commodore/Amiga "An end is always a new beginning." - Captain Cloud Any expressed opinions are mine; but feel free to share. I disclaim all responsibilities, all shapes, all sizes, all colors.