[comp.sys.amiga] hardware parameters needed for SLIP

mende@aramis.rutgers.edu (Bob Mende) (07/06/87)

Hi ...

   I am in the process of running SLIP (Serial Line IP) on my amiga.
I need two pieces of information that I dont have (since I dont have
the RKM or hardware manual.)

   1.	<I/O address>.  The base address of the control registers of
			the serial device.

   2.	<vector>.	The interrupt vector number of the serial
			device. 

   If you have then ... Please specify if they are in decimal or hex.
			


				Thanks...

					Bob
-- 
     mende@rutgers.edu    {...}!rutgers!mende    mende@zodiac.bitnet