anthes@geocub.UUCP (Franklin Anthes) (07/12/87)
I'm hoping that some knowledgeable AMIGA person will be able to help
me out. My problem is that I would like to hook up an analog RGB monitor
to my amiga. After looking at the signals available on the monitor connector
and on the video input of the computer I identified the following signals as
having the same names (compatible?) :
- analog red
- analog green
- analog blue
- ground
- horizontal sync.
- vertical sync.
Now I would like to know if these signals are sufficient for the setup to
work?
Other signals which are present on the monitor ( but not on the amiga
video connector) are :
- red feedback
- blue feedback
- green feedback
- autotest
I haven't tried making a cable and hooking the monitor up, since I haven't
bought the monitor yet.
The most appropriate way to reply would probably be to mail me any
information you might have. ( I love mail! )
Many thanks from a newborn amigoid!
Frank Anthes-Harper
Usenet: ....!ucbvax!decvax!seismo!mcvax!inria!geocub!anthes
Mail : Res.Formanoir
T.9 Apt.1017
33600 Pessac
France
Tel. : 56-45-92-69 (don't forget to add any wierd prefixes you need to reach
France)
--
Frank Anthes-Harper
Usenet: ....!ucbvax!decvax!seismo!mcvax!inria!geocub!anthes
Mail : Res.Formanoir
T.9 Apt.1017
33600 Pessac
France
Tel. : 56-45-92-69 (don't forget to add any wierd prefixes you need to reach
France)