[comp.sys.amiga] 2 novice questions - help please

john@bby-bc.UUCP (11/11/87)

Sometime during the next month I am going to purchase an Amiga and
I would appreciate a little advice before hand with a couple of
questions:
	1. My plan was to get a 500 but would I be better off with
	   a 1000 (new or used)?  The only advantage I see to the
	   1000 is having a detachable keyboard (which I prefer) and
	   a built in monitor stand (of sorts).  I have heard the chips
	   in the 500/2000 are improved over those in the 1000, is this
	   true?

	2. I alredy have a Sony Multiscan monitor which I use for other
	   purposes which I would like to use with the Amiga - can
	   someone help with cabling requirements (e.g. do I need any
	   damping resistors)?  The multiscan is supposed to be completely
	   compatible with the Nec Multisync as far as it's electrical
	   requirements go so if you have the answer for the Nec that
	   would probably be just as good.

Eventually I would like to add a scsi interface to control a  scsi<->qic02
interface and drive (which I already have) and a scsi disk (which I would
have to buy also).  And of course more memory.  Does anyone have any
suggestions on good manufacturers and/or mail order suppliers of such items?
Bear in mind I am a complete novice as far as the amiga is concerned so I
don't know what products are available (don't see much useful info in the
magazines I have looked at) or who are reputable suppliers.

Any information would be appreciated - thanks very much in advance!!

john (future amiga owner!)
 ....!ubc-vision!{fornax | sfucmpt}!bby-bc!john