charles@hpcvcd.HP (Charles Brown) (11/19/87)
>... our 68020 board currently works just fine on Rev 4.2 boards, >Rev 3.9 boards, and German A2000s. I haven't tried it, but I bet it would >work on the (unreleased) Rev 2.0 board as well. >Dave Haynie Commodore-Amiga Usenet: {ihnp4|caip|rutgers}!cbmvax!daveh From this it sounds like your 68020 board should also work fine in ASDG's 2000&1 box. Can you (or Perry) confirm this? Your 68020 board sounds like a good product. Thank you. Charles Brown hplabs!hp-pcd!charles
daveh@cbmvax.UUCP (11/23/87)
in article <4410015@hpcvcd.HP>, charles@hpcvcd.HP (Charles Brown) says: > > From this it sounds like your 68020 board should also work fine in > ASDG's 2000&1 box. Can you (or Perry) confirm this? I'd sure expect it to, but I don't have an ASDG 2000-and-1 box yet, and Perry doesn't have a 68020 board yet. To use it, you'd remove the 68000 from your A1000, set the 68020 board to the "A2000" position, and zoom, I suspect. Since an A1000 with 2000-and-1 box should appear electrically identical to the German A2000 (at least timing-wise), I don't expect any problems. > Charles Brown hplabs!hp-pcd!charles -- Dave Haynie Commodore-Amiga Usenet: {ihnp4|caip|rutgers}!cbmvax!daveh "The B2000 Guy" PLINK : D-DAVE H BIX : hazy "I can't relax, 'cause I'm a Boinger!"
eric@hector.UUCP (11/30/87)
As Dave has said - he doesn't have a 2000-and-1 and we don't
have a CBM 68020 card - but we expect things to work out perfectly
since the CBM card will operate in the german A2000. I can assure
you one of the first completed 2000-and-1's will go to CBM for their
testing and amusement.
(perry here - using eric's account for now)
See ya.
ARPA: lavitsky@topaz.rutgers.edu "Lithium is no longer available
UUCP: ...{wherever!}ulysses!eric on credit..."
...{wherever!}rutgers!topaz!eric - from Buckaroo Banzai
SNAIL: 34 Maplehurst Ln, Piscataway, NJ 08854