msl5864@ritcv.UUCP (Michael S. Leibow) (05/03/88)
Thanks for all of the replies I received about my SupraDrive. I did get all kinds of suggestions: 1) clean the contacts on all of the cards. 2) check all of the power supply voltages while everything is on. 3) use a fan 4) don't use more than one expansion product at a time. Since my last posting, I received a new SupraDrive 20M from Supra Corp (no charge) and also a free fan to keep the thing cool. I have been using the thing for two days straight with every expansion device I own plugged into my Amiga. I have: an extra floppy, an aMega 1Mb ram card, genlock, SupraDrive 20MB, and of course the monitor. 1) the contacts are clean. 2) all power supply voltages are equal or above 5 volts and 12 volts. 3) there is now a fan in the Supra 4) Screw this idea. I will use all of my expansion products all of the time except for the genlock. as far as the last two days go: I HAVE HAD ABSOLUTELY NO PROBLEMS. :-) I hope this continues... -- Michael S. Leibow UUCP: {allegra,seismo}!rochester!ritcv!msl5864 CSNET: msl5864%rit@csnet-relay.ARPA