KRSEAR01@ULKYVX.BITNET (Kendall Sears) (05/05/88)
Hey folks, This may have been brought up before but I just cannot remember the contents of the 15K+ articles I read, so here goes. I have a problem with VD0: on my A500 w/ 1 Meg. Everything works OK until VD0: reaches 50% capacity then when I have to <CTRL>AA everything is lost. A friend of mine has the same problem on his A500. But on my A/B2000 (A for Amiga, B for model, but you knew that huh :-) everything works fine even at 100% capacity. My 2000 also has 1M. It seems that the expansion port ram is causing the problem. You are probably asking "If he has a 2000 why is he using a 500?" well the answer is: The 500 is my portable system. Anyway, any suggestions on how to fix this annoyance? Am I right about the Expansion Ram? This has bugged me for the last few months, because my program is getting to the point where I have to do the work only on my 2000 because if the thing GURU's I lose everything in the 500. I really don't want to stop using my 500 for this project, but..... Thanx. Opusii ------------ Kendall "Opusii" Sears KRSEAR01@ULKYVX.bitnet ...!psuvax!ulkyvx.bitnet!KRSEAR01 (UUCP) Snail: 3100 Chinquapin #38 Louisville, KY 40219 --------------------------------------------------- "Off to the Derby..... Any wagers?"