[comp.sys.amiga] List of Harddrives that fit in 3 1/2" slot

wpl@anarchy.PRC.Unisys.COM (William P Loftus) (05/20/88)

I bought a ST125 at a computer show in my home town, and I was very suprised
to find that it couldn't be mounted in the 3 1/2 inch slot, at least
myself, and about ten dealers couldn't figure out how.  (One dealer,
said that ST506 3 1/2" drives except to be mounted from the sides,
not the bottom).

So anyway, don't buy an ST125 for your 2000.

Now, does anyone have a list of all the hardrives 5 1/4" and 3 1/2"
that have worked in the amiga (including being able to mount them).
If not I would be willing to manage (read keep) an updated list of
drives known to work for the Amiga, and post it once in a while.

If your using a drive that isn't listed in the 2090 manual, send me a note.
include (drive name, storage size, which slot you used, controller,
and anything special you had to do to get it to work).

Thanks,
Bill
William P Loftus			UUCP:   wpl@burdvax.UUCP
Unisys/Paoli Research Center		ARPA: 	wpl@anarchy.prc.unisys.com
PO Box 517				BITNET: 202527899@VUVAXCOM
Paoli, PA 19301                         215-648-7248 (work) 215-354-0614 (home)

papa@pollux.usc.edu (Marco Papa) (05/20/88)

In article <6433@burdvax.PRC.Unisys.COM| wpl@anarchy.PRC.Unisys.COM (William P Loftus) writes:
|I bought a ST125 at a computer show in my home town, and I was very suprised
|to find that it couldn't be mounted in the 3 1/2 inch slot, at least
|myself, and about ten dealers couldn't figure out how.  (One dealer,
|said that ST506 3 1/2" drives except to be mounted from the sides,
                               ^^^^^^^^^^^^^^^^^^^^
I this english? What do you mean?

|not the bottom).
|So anyway, don't buy an ST125 for your 2000.
|Now, does anyone have a list of all the hardrives 5 1/4" and 3 1/2"
|that have worked in the amiga (including being able to mount them).
|If not I would be willing to manage (read keep) an updated list of
|drives known to work for the Amiga, and post it once in a while.

3 1/2" Miniscribe drives (the 8000 series) do mount fine on the "small"
slot (the one left of df0:). I have an 8438.

-- Marco Papa 'Doc'
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
uucp:...!pollux!papa       BIX:papa       ARPAnet:pollux!papa@oberon.usc.edu
 "There's Alpha, Beta, Gamma and Diga!" -- Leo Schwab [quoting Rick Unland]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=