rstiles@pnet02.cts.com (Rick Stiles) (05/28/88)
Well, I just got a protoborad-II in the mail and I thought I would let
you all know about a very good prototype Zorro-II board for the 2000.
Its a two layer board with plated through holes on a 0.1" grid pattern.
The auto-config layout is build in on the board so it should be straight
forward to get the auto-config stuff up and running.
Even with the auto-config layout on the board, there is still place for
119 16 pin DIP IC devices. It also supports PLCC and PGA type sockets.
They also include a adjustable bracket and layout for various DB connectors
and header pins.
It has voltage and ground planes and the edge connector is gold plated.
They also provide a disk with a BASIC and the Fortran Version 1 of a PAL
assembler and some other utilities.
The price was 49.95.
If you call and ask them, they'll send you a flyer with the layout of the
board. Their phone # is (409) 833-2686.
Rick.
==============================================================================
The needs of the many outweigh the needs of the few. (Mr. Spock)
So why does Commodore keep sending stuff to Jerry Pournelle.
==============================================================================
UUCP: {ihnp4!scgvaxd!cadovax rutgers!marque}!gryphon!pnet02!rstiles
INET: rstiles@pnet02.cts.com