lel@wuphys.UUCP (Lyle E. Levine) (06/14/88)
I need to set up an Amiga 2000 system in our lab (I convinced them at last!). I'm putting a 5 1/4" floppy in the lower bay and a single 3 1/2" floppy in the upper right bay. This leaves just one 3 1/2" bay for a hard disk. Does anyone know of any good 3 1/2" hard drives out there? If I have to, I'll go external but I'd rather not... Does anyone make non-RLL 30 Meg drives that will fit into a 3 1/2" slot? I don't care if it's SCSI or ST506. Thanks in advance!!!!! ========== IBM is a Division of Sirius Cybernetics Corporation "their fundamental design flaws are completely hidden by their superficial design flaws." - "So Long And Thanks For All The Fish" Lyle Levine: Paths -> ihnp4!wuphys!lel Best way: (314)889-6379 uunet!wucs!wuphys!lel
billd@crash.cts.com (Bill D'Camp) (06/16/88)
[] I'm using a Rodime 652 20MB SCSI with a Pacific Peripherals Overdrive card in my BusExpander. I've only had it a couple of weeks, but it seems to be very nice, and it was only $225. Got it from J.B. Technologies in Chatsworth, CA. They advertise in Computer Shopper, but if you don't have a copy of that their number is (818) 709-6400. They had real good prices on other drives as well. If you call them ask for John and mention Bill's Boards recommended them, it probably won't get you a better price, but they seem to be a good outfit and I'd like them to know we think so. By the way the Overdrive card is working very nicely as well. It is a SCSI/DMA controller, and will auto-boot ( with changed proms ) when 1.3 comes out. The people at Pacific Peripherals are very responsive and were kind enough to let us have a card for evaluation in the BusExpander. That doesn't mean they gave us a freebie, but we can return it after the evaluation instead of paying for it, although I think we will buy it. Bill D'Camp General Partner Bill's Boards -- _ /| Fundamentally Oral Bill \`o_O' UUCP: {akqua,hplabs!hp-sdd,sdcsvax,nosc}crash!billd ( ) Aachk! Phft! ARPA: crash!billd@nosc.mil U INET: billd@crash.CTS.COM Bill's Boards --- peripherals for the Amiga
holmes@dasys1.UUCP (David Holmes) (06/24/88)
The one I'm using (with the Bridgeboard) is a Kyocera 3 1/2" RLL drive. I picked it up from Silicon Valley Computer. They have a fairly wide variety of 3 1/2" hard drives, everything from MFM, SCSI, RLL, and ESDI. The only hitch is they'll only sell to an institution or business. The phone number is (408) 288-8837. I've used quite a few of their drives over the years and haven't had any problems whatsoever. Usual disclaimer - just a happy customer. -- David Holmes 323 Seward Place Schenectady, N.Y. 12308 {allegra,philabs,cmcl2}!phri!dasys1!holmes (518) 372-0965 or holmesd@union.bitnet
robocop@netmbx.UUCP (Thorsten Ebers) (06/25/88)
In article <3122@crash.cts.com> billd@crash.CTS.COM (Bill D'Camp) writes: >[] > >It is a SCSI/DMA controller, and will auto-boot ( with changed proms ) >when 1.3 comes out.[...] Can you give more details about the overdrive Card ? I wold like to know about the card : 1. Can it be attached to the A1000. 2.Does it need other hardware to attach to the a1000. 3. What ist the price for the card. -- Thorsten -- Thorsten Ebers --> PLEASE DO NOT MAIL OUTSIDE GERMANY <-- Goerresstr.20 --> OUTSIDE GERMANY,POST IT <-- 1000 Berlin 41 robocop@netmbx.UUCP Germany Phone: 030/851 84 60 'Io amore mia amiga,et tu ?'