matt@beatnix.UUCP (Matthew D. Shaver) (06/28/88)
In article <4113@cbmvax.UUCP> jesup@cbmvax.UUCP (Randell Jesup) writes: > This sounds like the problem that was corrected very recently >in the driver. The November version of the driver fixed this for st506, >the latest version (available on bix and I think other networks as well) >fixes it for SCSI as well. The new version is in an ARC file on bix named >I believe HD34.4. It may not totally solve the problem, but should reduce >it considerably. > I just downloaded HD34.4 and it has not helped my problem at all. I have an A2090, an ST251N (SCSI) drive a rev 4.1 mother board and no extra memory in my 2000. DPaint still gets an error every time it accesses the disk when in 640x200 or 640x400 mode. ==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-==-== Matthew D. Shaver --- UUCP: ..!{sun|lll-tis}!elxsi!beatnix!matt USPS: ELXSI Ltd., 2334 Lundy Pl., San Jose, CA 95131 BELL: (408) 942-0900
Gary_D_Walborn@cup.portal.com (07/08/88)
I have had continuing problems with the 2090 and a SCSI drive. I had been running the 2090 with a ST-506 type drive with no problems. Then I went and bought a Jasmine MegaDrive designed for the Mac. The Jasmine drive formats just fine and I can write to the disk with absolutely no errors. In fact, I only get errors while reading from the drive. While reading I frequently encounter read/write errors. I have tried everything to eliminate this problem and have met with no success. HELP! If anyone has any suggestions, please let me know. Gary D. Walborn cup.portal.com