brianm@sco.COM (Brian Moffet) (09/26/88)
I asked several days/weeks ago regarding recommendations for
memory products for the amiga 1000. After going through all
of the replies that I recieved, I decided on the Microbotics
Starboard 2 memory expansion. Thanks to all those who replied,
I deeply appreciate it.
The reasons I chose the Microbotics were:
1) previous configuration of this board and a Supra 4x4
working.
2) Possability of adding a moduel which would allow me to
add a math processor as a peripheral device.
3) 2 Meg capability. Currently I have 512K in there which
brings my ami 1000 to 1 meg.
4) Doesn't go inside the amiga. This is important to me
because of the future possibilty of an accelerator
card.
So far so good. I plugged it into the side of my amiga and
it worked just wonderfully. I had to move my modem
off to the side but no biggie. Unfortuanately, no
Robo-City doesn't work ... Darn :-)
brian
--
Brian Moffet {uunet,decvax!microsoft,ucscc},sco!brianm
"Evil Geniuses for a better tomoorow!" My fish and company have policies.
I have opinions.