ISCOVE%UTOROCI.BITNET@CORNELLC.CIT.CORNELL.EDU (11/20/88)
Connecting the NEC Multisync II to Amiga 2000 was straight forward:
Amiga pin function Multisync pin (P9 connector)
3 analog R 1
4 analog G 2
5 analog B 3
10 comp synch 4
16 gnd 6
17 gnd 7
19 gnd 8
20 gnd 9
A standard 25 pin connector was modified by sawing off the outer 2 pins to
allow the connector to seat properly over the 23 pin Amiga output
connector. Note that the Amiga side seems only to use the composite synch
output. The separate H and V synch outputs did not work. They, and the
digital colour outputs, are presumably for use by the bridge board.
Norman Iscove
Ontario Cancer Institute
Toronto
iscove@utoroci