whitlock@tc.fluke.COM (David Whitlock) (11/21/88)
I need some help. I recently purchased a CLTD SCSI 2000 controller card and
a seagate st-251N 40M Hard Drive. I've tried just about everything that
CLTD's manual suggests, but when performing a 'seamat 1 251' (seagate format
program) I always get a 'mode' error. I am able to lolevel format using their
generic format program 'romat' but when I try to do a higher level DOS
format, at the conclusion I get a checksum error, followed by a Not a Dos Disk.
What could be the problem, is it the CLTD card, the seagate or what.
If any of you have set up a seagate drive, please email me your mountlist
and suggestions
Thanks in advance
-- David Whitlock
internet: whitlock@tc.fluke.COM
uucp: {decvax!sun,ucbvax!sun,uw-beaver,ssc-vax,allegra,lbl-csam}!fluke!whitlock
John Fluke Mfg. Co., Inc. 33031 Schoolcraft, Livonia, MI 48150 (313) 522-9140
--
-- David Whitlock
internet: whitlock@tc.fluke.COM
uucp: {decvax!sun,ucbvax!sun,uw-beaver,ssc-vax,allegra,lbl-csam}!fluke!whitlock
John Fluke Mfg. Co., Inc. 33031 Schoolcraft, Livonia, MI 48150 (313) 522-9140