flocchini@deneb.ucdavis.edu (0048;0000012204;200;745;53;) (01/08/89)
I am having problems trying to install the 1.3 FFS on my system. The system is a 1000 with a CSA Turbo box. I have two 40 Meg Conner drives. THe other night I decided I would try to put the FFS on the second drive. After formatting with 1.3 I then tried to copy files to this drive. I would get a message indicating a read/write error and basically had to go back to format again. I repeated this a couple of times with the same result. Finally I formatted the drive with 1.2 format and everything seems to be back to normal. Has anybody with a CSA system been successful with 1.3 FFS or maybe is there something I am missing. The box also has the 20 board, 1MB of 32bit memory and an ASDG memory board. When formatted with 1.2 the system will work with 1.3 disks. I just can't get the FFS on the drive. My hard disk device is that provided by CSA in Nov 87. Thanks in advance. Please email to rgflocchini@ucdavis.edu flocchini@deneb.ucdavis.edu Bob Flocchini