[comp.sys.amiga] Bridgeboard: Clock, mouse, Accelerator Boards, Serial

PBOURKE%IRLEARN.BITNET@cunyvm.cuny.edu (P Bourke) (02/04/89)

Four questions on the A2088 which I would appreciate answers to if poss:

1)  Is there a program that can set the PC's clock by reading the Amiga's?

2)  Any utility to allow the Amiga mouse emulate a PC microsoft one?

3)  Does the Microsoft Mach20 speedup card work with the A2088. If no one
    is sure can I damage anything by plugging it in?

4)  Anything like LPT1 that would allow the Amiga's RS-232 emulate COM1?

Finally an APPROX release date for Janus 2.0 s/w would be appreciated and
will screen updates be quicker? Or rather LESS SLOW!

sneakers@heimat.UUCP (Dan "Sneakers" Schein) (02/05/89)

In Message <7938@louie.udel.EDU>, PBOURKE%IRLEARN.BITNET@cunyvm.cuny.edu (P Bourke) writes:

>1)  Is there a program that can set the PC's clock by reading the Amiga's?

     I wrote one (back when I was @ CATS fooling with Janus) and it worked
	 fine. But due to agreements with CBM I can not release it. However the
	 new 2.0 Janus software will solve this problem in a very nice and (if I
	 may say) professional manner.

>2)  Any utility to allow the Amiga mouse emulate a PC microsoft one?

     Again there is such software, and yes it works geat. But like setting
	 your clock, it wont be available till Janus 2.0 is released.

>3)  Does the Microsoft Mach20 speedup card work with the A2088. If no one
>    is sure can I damage anything by plugging it in?

     Never tried one. Don't think it will blow anything out, but its your
	 boards and $$$, not mine.

>4)  Anything like LPT1 that would allow the Amiga's RS-232 emulate COM1?

     No. Simply buy a cheap (IE: < $50) serial card and your off!

>Finally an APPROX release date for Janus 2.0 s/w would be appreciated and

     Sorry in not the person to answer this one.

>will screen updates be quicker? Or rather LESS SLOW!

     Look about the same to me. Slow is slow.

	 Sneakers

--
Dan "Sneakers" Schein          {pyramid|rutgers|uunet}!cbmvax!heimat!sneakers
Sneakers Computing
2455 McKinley Ave.                     Of course heimat is an Amiga.
West Lawn, PA 19609           Doesn't everyone run UUCP & UseNet on an Amiga?

   Call: BERKS AMIGA BBS - 60+ Megs - 24 Hrs - 12/2400 Baud - 215/678-7691

bill@cbmvax.UUCP (Bill Koester CATS) (02/07/89)

In article <7938@louie.udel.EDU> PBOURKE%IRLEARN.BITNET@cunyvm.cuny.edu (P Bourke) writes:
>Four questions on the A2088 which I would appreciate answers to if poss:
>
>1)  Is there a program that can set the PC's clock by reading the Amiga's?
>
	Yes - Atime and Timeserv under v2.0

>2)  Any utility to allow the Amiga mouse emulate a PC microsoft one?
>
	Yes - AMouse, also under V2.0

>3)  Does the Microsoft Mach20 speedup card work with the A2088. If no one
>    is sure can I damage anything by plugging it in?
>
	Don't know. Hopfully not but thats a loaded question.

>4)  Anything like LPT1 that would allow the Amiga's RS-232 emulate COM1?
>
	No.

>Finally an APPROX release date for Janus 2.0 s/w would be appreciated and
>will screen updates be quicker? Or rather LESS SLOW!

	Approximately any time now.
	No, no... sorry.


-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Bill Koester (CATS)            >>Commodore Amiga Technical Support<<
Commodore International Ltd.   UUCP {allegra|burdvax|rutgers|ihnp4}!cbmvax!bill 
		               PHONE  (215) 431-9355
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The official word, is NO. I am therefore going anyway!
   						         Kirk - Star Trek III

                Pleese desrigard eny spealing airors!!!!!!!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=