tope@enea.se (Tommy Petersson) (02/13/89)
In article <2221@van-bc.UUCP> lphillips@lpami.wimsey.bc.ca (Larry Phillips) writes: :In <5940@cbmvax.UUCP>, daveh@cbmvax.UUCP (Dave Haynie) writes: :>As long as 100 pin cards are in spec, they'll work fine on both machines. All :>Genlocks should work similarly. The B2000 video slot has many more signals, :>but the only thing I know of on the market that's currently taking advantage :>of that slot is MicroWay's flickerFixer, which won't work on the "A" board. : :What Dave says is true, though I do have a flickerFixer running in my A2000. I :had to add 8 wires from the fF to the motherboard, and it looks a little :strange, but it definitely works. : :-larry : :-- :Frisbeetarianism: The belief that when you die, your soul goes up on : the roof and gets stuck. :+----------------------------------------------------------------------+ :| // Larry Phillips | :| \X/ lphillips@lpami.wimsey.bc.ca or uunet!van-bc!lpami!lphillips | :| COMPUSERVE: 76703,4322 | :+----------------------------------------------------------------------+ A (somewhat) related question: I want the function of the FlickerFixer, which I can get here in Europe for (I think) about $500. I already have an Eizo/Nanao Multiscan monitor, so there's no problem (I have an B2000). I just wonder: does it CURRENTLY exist any video card that will give me the same function as the FlickerFixer + some other better resolution modes that preferrably would be supported by some programs? It would be nice if it didn't cost more than $1000, at least not much more.