daemon@watale.waterloo.edu (joejobber process) (03/05/89)
Does any documentation exist that explains how to configure the Amiga version of KA9Q TCP/IP? In particular, I am having great difficulty trying to figure out what address, and interrupt to specify for the "attach asy" command. And I suspect that I will have other problems as well, since this version is not quite the same as the IBM PC version for which I do have documentation. I would be grateful for any pointers. Thanks, Barry Kahl (guest@surya.waterloo.edu, watmath!surya!guest)
rminnich@super.ORG (Ronald G Minnich) (03/08/89)
In article <3076@watale.waterloo.edu> guest@surya.waterloo.edu (Barry Kahl) writes: >trying to figure out what address, and interrupt to specify for the >"attach asy" command. And I suspect that I will have other problems well, you don't need either since it always uses serial.device. If i remember right (i am at work) just use 0 for address and interrupt. Use your baud rate for the baud rate, and all else follows the standard PC ka9q. Good luck, ron