amichel@neabbs.UUCP (MICHEL LANGEREIS) (03/29/89)
In message <122018@cnetlu.UUCP> mallet@cnetlu.UUCP (Mallet Olivier) writes: > [ ... ] > >c) NO paper manual, NO readme file, NO DOCs. > > [ ... ] >4. What if I install the GVP EPROM chips before the Kickstart 1.3 ROM ? You did get a manual with your drive, did you ? Anyway, look at page four of that manual and look at the picture, there they are, the sockets for your eproms ;-) At the PCB each socket is labeled 'something', that something is also on your eprom, put the right one in the corresponding socket. Nope, you don't have to prep your drive again when you get your 1.3 roms from your local dealer or CBM France. If you don't remove jumper two and install the eproms without the 1.3 roms it just will not work, I guess you have to open your A2000 again to remove 'that' jumper. If this isn't much of a help call GVP, they will help you out for sure. GVP: 215-889-9411 BTW: I got mine with the eproms pre-installed, the only thing I had to install myself was the 1.3KS rom, and who's gonna tell me they didn't improve AmigDOS uh ? Thanks guys. (for the autoboot :-) Have fun, (ml) UUCP: ...!mcvax!telmail!neabbs!amichel -- Only above opinions are for sale. In hell they don't need a fauna, on earth it will be hell if we stay at the same track we are now. But hey! we're angels and we can fly away anyday.