hrlaser@sactoh0.UUCP (Harv R. Laser) (04/07/89)
This is being posted for a friend... if Scott Turner is still reading c.s.a. or anyone else feels qualified to help Glenn out of his dilemma, feel free. [quoting the original article which is almost 2 years old...] --------------------------------------------------------------------------- Article 4995 of comp.sys.amiga: Path: mcdsun!noao!hao!husc6!seismo!ut-sally!utah-cs!utah-gr!stride!l5comp!scotty l5comp.UUCP (Scott Turner) Newsgroups: comp.sys.amiga Subject: scottdisk.device source/dox/executable for SCSI device driver Summary: A MOUNTable device driver for MicroForge and others (if you adapt it :) l5comp.UUCP> Date: 26 May 87 08:27:32 GMT l5comp.UUCP (Scott Turner) Distribution: world Organization: L5 Computing, Edmonds, WA Lines: 444 This is the mountable MicroForge driver that I mentioned. Several people wanted it so here it is... Two notes: 1. It's a generic 4 parallel port SCSI host adapter device driver. Those of you with a yen to hack TTL gates could cook up an interface for $20 - $30 to use with this driver. 2. It includes notes on making a DF1: partition for use with DiskCopy... Scott Turner -- L5 Computing, the home of Merlin, Arthur, Excalibur and the CRAM. GEnie: JST | UUCP: stride!l5comp!scotty | 12311 Maplewood Ave; Edmonds WA 98020 If Motorola had wanted us to use BPTR's they'd have built in shifts on A regs [ BCPL? Just say *NO*! ] (I don't smoke, send flames to /dev/null) ---------------------------------------------------------------------------- and now Glenn's reply/query.... ---------------------------------------------------------------------------- Scott, I recently tried to set up a 40MB MicroForge system with the scottdisk.device I found on Fred Fish Disk #84. The instructions never made it to the FF disk, but from the ASM source included, I tried it out. No matter what I did, the HD always hung up the system on the first access of the drive. I tried going back to the source, and configuring it for the 40MB drive, re-assembling it, but it still hung. I was hoping (if this reaches you) that you may have an updated version, and/or docs that you could send to help me install your driver so that the FFS could be used with the MicroForge. I can be contacted at Express-Way Software (314) 474-2984 and would appreciate ($$$) any help you may be able to give. I don't have access to USENET, but someone else was nice enough to volunteer to send this for me. Thanks, Glenn Nielsen ----------------------------------------------------------------------------- Thanks, Net. Harv. Plink: CBM*HARV -- ############################################################# # PRIVATE # SAC-UNIX, Sacramento, Ca. # # PARKING # UUCP=...pacbell!sactoh0 # #############################################################