pat@bingvaxu.cc.binghamton.edu (Pat Rolls) (05/26/89)
After upgrading to R1.3 amiga and after an upgrade to our Ultrix system, I tried to utilize DNet again and had some trouble. I changed the software to DNet-2.01 and now can not even complete the FTERM It seems to be hung. I tried the old DNet-1 on the amiga and DNet-2 on the Unix side and it completes the FTERM. But it does not free the shell window I started it from. It allowed multiple tasks if I opened a new window. Any ideas are appreciated.-------------pat Amiga-side 1.2 Roms 1.3 Enhancer ARP1.3 Conman Dmouse Ashell Unix-side VAX 8530 with DMB-32 async lines Ultrix release 3.0 Terminal switch/controller is a Develcon Dataswitch .login: stty -pass8 autoflow dec new cr0 tset -I -Q umask 077 setenv MAIL /usr/spool/mail/$USER set mail=$MAIL setenv LINK_TIMEOUT 3 set path=(. $HOME/DNet-2.01/unix/bin $HOME/bin /usr/ucb /bin /usr/bin /usr/local/bin /usr/new /usr/games) setenv EXINIT 'set redraw wm=8' setenv PRINTER rr setenv DNETDIR ~/.DNET2/ set term=vt100 tset -I -Q biff n date alias la uptime .profile: PATH=.:$HOME/DNet-2.01/unix/bin:$HOME/bin:/usr/ucb:/bin:/usr/bin:/usr/local/bin:/usr/new:/usr/hosts MAIL=/usr/spool/mail/$USER tset -n -I export TERM MAIL PATH biff n cshrc: if ($?prompt) then set notify set history = 20 alias pd pushd alias pop popd alias vt52 "set term = vt52" alias ti745 "set term = ti745 ; stty -tabs" alias ti785 "set term = ti745 ; stty -tabs" alias vt100 "set term = vt100" alias am "set term = amiga" alias dn "dnet" endif Procedure: set amiga path to Dnet-2 binaries start dnet -8 -X -h0 login from dnet window over 1200 baud Smart Team modem set term=amiga stty -parity -istrip pass8 set fcf=none fct=none xmitbinary=on dnet