SPRG9194@pacevm (Scott C. Kennedy (currently driving himself insane)) (07/07/89)
Greetings again, I finished installing the new fatter agnus inside my Amiga 2000 rev. 4.4 dealer upgraded to a 6.0 (or whatever is in the tech topics) last week. The first time I tried my system the video would not work because it seems the sync signals were straying off of the norm. We replaced the Agnus with a new one and now that works fine. But my problem now is that I cannot write or modify any files on any of my hard dive partitions. I think it is something in my mountlists but I can't find out what it is. What other features will fatter agnus give me besides 1 meg of CHIP RAM and write-protected hard drives? :) My system contains/is/would like to remain 1- Amiga 2000 rev 6.0 (whatever) w/ A-2090 contected to a Miniscribe 8425F (ST-506) 20 MB Hard Drive. Micron 2 MB Ram Board. A-2088 Bridgeboard, EGA Card, AST 6 pak +, and a PLUS HardCard 20. This is my mountlist for my RES0: DH0: and DH1: RES0: Device = hddisk.device Unit = 1 Flags = 0 Surfaces = 4 BlocksPerTrack = 17 Reserved = 0 Interleave = 0 LowCyl = 0 ; HighCyl = 1 Buffers = 1 BufMemType = 0 # DH1: Device = hddisk.device Unit = 1 Flags = 0 Surfaces = 4 BlocksPerTrack = 17 Reserved = 2 Interleave = 0 LowCyl = 29 HighCyl = 611 Buffers = 20 Stacksize = 4000 GlobVec = 1 FileSystem = L:FastFileSystem DosType = 0x444F5301 # Thank you... Special Thanks to Stephen Walton for his RAD: fix and thank you for all the E-Mail Replies.. (both of you.) ------------------------------------------------------------------------ Scott C. Kennedy (SCK @ YKTVMT) (QP06000 @ PACE) (SPRG9194 @ PACEVM) Graphics/Visualization/Image Systems Computer Science Dept. I.B.M. Thomas J. Watson Research Facilty Pace University ------------------------------------------------------------------------