dak@pro-graphics.cts.com (Stephen Datkowitz) (11/19/89)
Has anyone heard of a module that allows sculptAnimate to serve as the front end for a Wave front? I remember reading about it somewhere but no one seems to have any info now. _______________________________________________________________________________ UUCP: crash!pro-graphics!dak | ProLine: dak@pro-graphics InterNet: crash!dak@pro-graphics.cts.com | 201/469-0049 3/12/2400 Baud ARPA/DDN: crash!pro-graphics!dak@nosc.mil | 24 Hrs. Piscataway, NJ _______________________________________________________________________________
unland@cbmvax.UUCP (Rick Unland - Regional Support) (11/22/89)
The module you are looking for was writen by Rodney Iwashina. Rodney works for the JPL in Calif. He wrote the converter for the guys at disney and he ow owns the rights to it on the Amiga as far as I know. I just placed a call to him over the phone and he will get back to me. If you want to talk to him leave me email so that he can call you. Rick -- ******* Rick Unland Commodore Business Machines **************************** * Usenet: uunet!cbmvax!unland ARPA: cbmvax!unland!@uunet.UU.NET * * These opinions are my Own! Not my employers, unless so stated! * * "I thought they said the Commodore could stand up to anything!" * *********************************************** Earth Girls Are Easy! **********
dak@pro-graphics.cts.com (Stephen Datkowitz) (11/27/89)
For all those you interested in the Sculpt Wavefront connection I posted earlier, I have located the article I first read it in. From the September issue of AV Video (a semi-respectable trade magazine in the video community) Matthew Leeds mentions in his article "Brewing Amiga Solutions": ".....Access Technologies' ACAD Translator converts AutoCAD files to SA4D files, and Byte by Byte is about to introduce an SA4D-to-Wavefront conversion module." I know it doesn't really clear up any questions but the fact that it exsists in print gives the whole thing a little more credibilty..."I read it in Rolling Stone so it MUST be true..." or so the joke goes. I'll keep an ear and eye open for more info hope y'all will do the same. DAK _______________________________________________________________________________ UUCP: crash!pro-graphics!dak | ProLine: dak@pro-graphics InterNet: crash!dak@pro-graphics.cts.com | 201/469-0049 3/12/2400 Baud ARPA/DDN: crash!pro-graphics!dak@nosc.mil | 24 Hrs. Piscataway, NJ _______________________________________________________________________________
unland@cbmvax.UUCP (Rick Unland - Regional Support) (11/28/89)
I think I poosted once before about this, If anyone is interested in the SA4D Sculpt to Waveefront converter you can mail me your address or telephone number and I will forward it to the author Rodney Iwashina. Rod owns the writes to the converter on the Amiga and is the only source. Rick Unland -- ******* Rick Unland Commodore Business Machines **************************** * Usenet: uunet!cbmvax!unland ARPA: cbmvax!unland!@uunet.UU.NET * * These opinions are my Own! Not my employers, unless so stated! * * "I thought they said the Commodore could stand up to anything!" * *********************************************** Earth Girls Are Easy! **********