liberato@drivax.UUCP (Jimmy Liberato) (12/06/89)
I have been unable to get the OmniTool from Project D to operate. This is the utility that allows you to do a diskcopy using the stock Amiga drives for other formats (ST, IBM, CP/M, etc.). The symptoms are a complete system lockup upon startup of the copy and also the staying on of the source drive light. Though I have a hard drive and extra memory, both were disabled and the stock Project D disk was used for booting. The results were the same. It occured to me that something similar occured months ago with Werner Gunther's PCpatch II which at the time I had shrugged off since I had no use for it. This is the utility that allows the PCcopy utility to use 3.5" drives. I tried it again and sure enough the same results. Fuller Systems did not know of any reasons for this effect. Any thoughts why this would occur on a stock system? (B2000 Rev 4.2) Thanks for any advice! -- Jimmy Liberato ...!amdahl!drivax!liberato