visinfo@ethz.UUCP (VISINFO Moderators) (12/07/89)
Fatter Agnus w/ Rev 4.5 mainboard. I have recently installed a new Agnus in my Rev 4.5 Amiga 2000. Since then it keeps on crashing during about 2 minutes after power up. The effect seems to have a connection with the temperature of either the Agnus or the mainboard. I have tried another Fatter Agnus - with the same result. However, with the old 8371 replaced, everything works fine. Who has experienced a similar behaviour? What could be the source of the problem? Solutions? F.BURGEL /* -------------------------- SG (Simeon Graphics) ---------------------- */ /* Peter Simeon, UUCP: | // // */ /* visinfo@bernina.ethz.ch | // Long live the AMIGA! // */ /* BIX: hardwiz | \X/ \X/ */ /* ---------------------------------------------------------------------- */
visinfo%ethz.uucp@cunyvm.cuny.edu (12/14/89)
Fatter Agnus w/ Rev 4.5 mainboard. I have recently installed a new Agnus in my Rev 4.5 Amiga 2000. Since then it keeps on crashing during about 2 minutes after power up. The effect seems to have a connection with the temperature of either the Agnus or the mainboard. I have tried another Fatter Agnus - with the same result. However, with the old 8371 replaced, everything works fine. Who has experienced a similar behaviour? What could be the source of the problem? Solutions? F.BURGEL /* -------------------------- SG (Simeon Graphics) ---------------------- */ /* Peter Simeon, UUCP: | // // */ /* visinfo@bernina.ethz.ch | // Long live the AMIGA! // */ /* BIX: hardwiz | \X/ \X/ */ /* ---------------------------------------------------------------------- */
scott@primerd.prime.com (12/14/89)
/* Written 10:30 pm Dec 13, 1989 by mmdf@udel.UUCP in primerd:comp.sys.amiga */ /* ---------- "Fatter Agnus Problems" ---------- */ Fatter Agnus w/ Rev 4.5 mainboard. I have recently installed a new Agnus in my Rev 4.5 Amiga 2000. Since then it keeps on crashing during about 2 minutes after power up. The effect seems to have a connection with the temperature of either the Agnus or the mainboard. I have tried another Fatter Agnus - with the same result. However, with the old 8371 replaced, everything works fine. Who has experienced a similar behaviour? What could be the source of the problem? Solutions? F.BURGEL /* -------------------------- SG (Simeon Graphics) ---------------------- */ /* Peter Simeon, UUCP: | // // */ /* visinfo@bernina.ethz.ch | // Long live the AMIGA! // */ /* BIX: hardwiz | \X/ \X/ */ /* ---------------------------------------------------------------------- */ /* End of text from primerd:comp.sys.amiga */