gt4662b@prism.gatech.EDU (BRANHAM,JOSEPH FRANKLIN) (12/07/89)
I noticed a mention of a hardware/software copier for the amiga from a group in West Germany. Does anyone know of the address of its manufacturer? Its cost? And what sort of hardware are they using to aid copying? I can remember copiers for the c64 that used a cable to connect the two drives and let the processors in the drives deal with the copy. (You could turn your c64 off-it was a trip.) -- BRANHAM,JOSEPH FRANKLIN Georgia Institute of Technology, Atlanta Georgia, 30332 "I know my familiar is a vampire duck, just don't mess with it." Internet: gt4662b@prism.gatech.edu
cowboz@image.UUCP (Oliver Adam) (12/23/89)
Hi .. => The Cyclone Copier is available from CACHET Software (the firm that also made XCOPY) / the Hardware makes it possible also to copy originals protected with socalled LONG-TRACKS i.e. Dragon's Lair ... but beware: if you got an amiga2000 you need one external disk drive to use this hardware, because it's plugged in the external disk-port, and then the diskdrive plugged in the hardware.