jtreworgy@eagle.wesleyan.edu (James Treworgy) (01/05/90)
Does anyone know if there is a problem with the ARP mount command? Or with ASDG's VD0: device (most recent version on FF disks before about 150, don't know if there is a newer one). I tried to install it and mount it using the ARP mount... mounts fine, and it shows up in my device list, but there is no way to access it (any attempts result in "device does not exist"). I haven't tried it with WB mount because my original WB 1.3 is locked up in my college room until the 20th. (I am trying to add this to my startup after a particularly unpleasant experience involving downloading to RAM, multitasking, and gurus) -- James A. Treworgy -- No quote here for insurance reasons -- jtreworgy@eagle.wesleyan.edu jtreworgy%eagle@WESLEYAN.BITNET
FelineGrace@cup.portal.com (Dana B Bourgeois) (01/07/90)
James, the latest VD0: is not always an improvement. I found that I couldn't use it on my system (A1000 with Insider 1Meg at C0000) because it doesn't work properly on memory installed outside the 8 Meg Fast Ram space. So I use the old version without any problems. I don't know if that is your problem but if you are using the latest version which works with up to 8 Meg and is written in assembler for smaller size and speed - and you have C0000 memory. You might be in the same boat I am. Dana @ cup.portal.com