jdp@caleb.UUCP (Jim Pritchett) (01/08/90)
[ Feed Noriega to the lineeater! ]
Hello,
I have a question about the infamous A2090 (not A) hard disk controller.
Which pins are the correct pins to plug the LED into when using SCSI drives?
There are two sets of pins which look like this:
SCSI1 LED
: :
Someone here mentioned that the LED should be plugged in differently for SCSI vs.
ST-506 drives. If this is a case of "Read the Manual", please tell me which
page to find the info on.
Thank you,
--
Jim Pritchett
UUCP: {attctc|texbell}!letni!caleb!jdp