tdesjardins@lion.waterloo.edu (Tim Desjardins) (01/13/90)
Hi. I'm having problems prepping my rodime RX1400 144.2 MB hard drive with the Commodore 2090A controller. I can mount the boot partition RES2:, but have not been able to prep it for some reason. I also have a Rodime RO3055 ST-506 drive already installed. After mounting RES2: which seems to work fine, I try and prep it, and after going all the way through prep, prep spits out DEVICE NOT PREPED. Nothing I try seems to work and I was hoping someone might be able to show me the error of my ways. Appended below is a copy of my mountlist file ( only the relevant portions ). Thank You in advance. Tim Desjardins. FH2: Device = hddisk.device Unit = 3 Flags = 0 Surfaces = 7 BlocksPerTrack = 33 FileSystem = l:FastFileSystem Reserved = 2 LowCyl = 2 ; HighCyl = 1218 Interleave = 0 Buffers = 50 GlobVec = -1 Mount = 1 BufMemType = 0 DosType=0x444F5301 StackSize = 4096 # RES2: Device = hddisk.device Unit = 3 Flags = 0 Surfaces = 7 BlocksPerTrack = 33 Reserved = 2 LowCyl = 0 ; HighCyl = 1 Buffers = 1 BufMemType = 5 # Have a nice day. Tim Desjardins. tdesjardins@spurge.waterloo.{edu|cdn}