KENNEDY%WWPACS@dupont.com (Tony Kennedy) (03/12/90)
Hi all,
...just like the subject line says...my initial startup cli doesn't
end when it gets to the endcli >NIL: line at the end. I've changed the
startup-sequence a bit and was wondering of the cause is...
CONAMN
DMOUSE with
DLINEART (which is RUN >NIL: <NIL: dlineart)
or
ASHELL
All these are the latest versions running under WB 1.3 (KS 1.2 I
didn't get the new ROMs yet)
This is only a bit of a pain. I start up 2 small sized ASHELLs and
want the original CLI to go away. Is it stuck because I RUN dlineart from
it? Will runback help? I haven't really hacked around much yet, but I
thought I'd get the collective net.wisdom on it first.
Thanks...Tony
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tony Kennedy Disclaimer: I know that you believe you understand
Project Engg. what you think I said, but I'm not sure you realize
Setpoint, Inc. that what you heard is not what I meant.
(304)863-2903 kennedy%wwpacs@dupont.com
kennedam%wwps@dupont.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~fgd3@jc3b21.UUCP (Fabbian G. Dufoe) (03/13/90)
From article <13625@baldrick.udel.EDU>, by KENNEDY%WWPACS@dupont.com (Tony Kennedy): > want the original CLI to go away. Is it stuck because I RUN dlineart from > it? Will runback help? I haven't really hacked around much yet, but I A simple test to determine if running dlineart is the source of your problem is to temporarily remove that line from your startup-sequence file. At first glance it certainly looks like dlineart is what's causing the problem. --Fabbian Dufoe 350 Ling-A-Mor Terrace South St. Petersburg, Florida 33705 813-823-2350 UUCP: ...uunet!pdn!jc3b21!fgd3
davidb@hplsla.HP.COM (David Bakeman) (03/17/90)
>/ hplsla:comp.sys.amiga / KENNEDY%WWPACS@dupont.com (Tony Kennedy) / 5:36 am Mar 12, 1990 / >Hi all, > ...just like the subject line says...my initial startup cli doesn't >end when it gets to the endcli >NIL: line at the end. I've changed the >startup-sequence a bit and was wondering of the cause is... > > CONAMN > DMOUSE with > DLINEART (which is RUN >NIL: <NIL: dlineart) > or > ASHELL > > All these are the latest versions running under WB 1.3 (KS 1.2 I > didn't get the new ROMs yet) > > This is only a bit of a pain. I start up 2 small sized ASHELLs and >want the original CLI to go away. Is it stuck because I RUN dlineart from >it? Will runback help? I haven't really hacked around much yet, but I ^^^^^^^ YEP >thought I'd get the collective net.wisdom on it first. > > Thanks...Tony > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Tony Kennedy Disclaimer: I know that you believe you understand > Project Engg. what you think I said, but I'm not sure you realize > Setpoint, Inc. that what you heard is not what I meant. > (304)863-2903 kennedy%wwpacs@dupont.com > kennedam%wwps@dupont.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >----------