pnelson@hobbes.uucp (Phil Nelson) (03/29/90)
I recently bought a 2091 with a Quantum 40Meg, these work well (fast too). When I tried to add a Conner Cp340, I ran into problems. I think the hardware is set up right, HDToolbox finds it OK as SCSI 1, and read the configuration from the drive OK, as; Drive Name: Cp340 (40mb 3.5), Drive Revision: 0456 Cylinders: 1205 Heads: 1 Blocks per Track: 68 Blocks per Cylinder: 68 When I try to format, a requester comes and goes too quickly to read, when I try to Verify Data on Drive, a requester comes and goes as above, then a 2nd requester says "Illegal Request Error (32)". Can anyone tell me what I'm doing wrong here? Also, will I be able to "Automount" this drive as a single FFS partition? Thanks in advance for any help you can give. Phil Nelson at (but not speaking for) OnTyme:NSC.P/Nelson BT Tymnet Voice:408-922-7508 UUCP:{pyramid|ames}oliveb!tymix!pnelson LRV:Component Station Help defend the Second Amendment - Boycott Time Inc.