andrews@cos.com (Andrew R. Scholnick) (04/07/90)
Many people have asked me for more information on the Konica drive in terms of specs and such. Here is more information. For those who do not recall, or who missed the earlier posting, I am selling a Konica KT-510 SCSI 10.7MB Capacity Half-Height Floppy Disk Drive. I am asking $650 plus postage (or best reasonable offer) for the drive and 10 (ten) 10.7MB diskettes (I need money for a genlock for my amiga). The drive has the following Specs: 480tpi storage (10.7MB) (also reads/writes 96tpi and 48tpi 5.25 disks) block size 512 bytes 30 blocks per track 700 tracks per disk 350 cylinders per disk Read/Write head with 26 micro-inch gap recording density of 18K flux changes per inch MFM Encoding 2 read/write heads (1 per disk side) track-to-track access (including settling time) 20 miliseconds maximum access time 120 milliseconds average access time 75 milliseconds spindle motor speed 600 rpm average latency 50 milliseconds maximum start time (to calibrate new disk) 1 second start time from standby 700 milliseconds autoconfigure/recognition of inserted disk's density interleave 1 skew factor 120 degrees Half-height case (1.62 inches) Standard SCSI interface automatic defect mapping when formatting automatic retry on error sustained transfer rate 1.6 Mbits/sec burst transfer rate 1.2 Mbits/second Hope this helps. ARS. -- - Andrew R. Scholnick @ Corp. for Open Systems, McLean, VA -- andrews@cos.com - {uunet, sundc, decuac}!cos!andrews -- Everything I write blame on me, NOT -- my employer. - "Adventure is when you toss your life on the scales of -- chance and wait for the pointer to stop." - M. Leinster (First Contact)