[comp.sys.amiga] FlickerFixer and Genlock

jones@uv4.eglin.af.mil (Calvin Jones, III) (04/10/90)

Doug Walker <walker@sas.uucp> writes (about the FlickerFixer):

> You do need to be careful about using it with a genlock, however -
> it requires an extra ($75) piece of hardware to work correctly.

What is this extra piece of hardware needed to use a Ff with a genlock?  
Seems that the manual says that the Ff will not work if the monitor is 
on, but that there is no need to remove the Ff from the slot (unless the 
genlock happens to be an internal model, one would assume.)

Is there something available (and from whom) that would allow the use of 
the Ff and a Genlock without "re-wiring" everything behind the Amiga?

   --- Cal