wizard@sosaria.imp.com (Chris Brand) (05/31/90)
In article <02592.AA02592@telepro.UUCP> oliphant@telepro.UUCP (Mike Oliphant) says: > I'm having difficulties getting Matt Dillon's UUCP 1.03D to work with an > HST 14400 modem. The modem calls out just fine, but doesn't connect properly. > Note that I am not trying to connect a high speed - the problems are occurring > at 1200 and 2400 baud. Has anyone managed to get an HST to work with this > software? I've had the same problems some time ago. My old Supra worked fine, and my HST didn't. It depends on the modem of your host. Mine had a Tahihao or whatever they're called and this modem was more or less incompatible with my HST. I solved the problem with re-writing part of uucico. Try to add some lines that slow uucico down while connecting (NOT while transmitting :-). Somehow my HST sent the connect data (name, pw and so on) too fast for the other modem. By adding some delay it worked. I also had to add a working break-sending-support, but note that all this was with a very old version of AmigaUUCP. Since I had never any problems with AmigaUUCP 1.03 or 1.05 I suspect it must be your host's modem. Try to find another site. -- ------------------------------------ Chris Brand - wizard@sosaria.imp.com "Justice is the possession and doing of what one is entitled to" - Platon ------------------------------------
mgh1@cbnewsl.att.com (matthew.g.hetman) (05/31/90)
> > I'm having difficulties getting Matt Dillon's UUCP 1.03D to work with an > > HST 14400 modem. The modem calls out just fine, but doesn't connect properly. > > at 1200 and 2400 baud. Has anyone managed to get an HST to work with this > > software? I has a similar problem with my HST when I first tried it. I could connect to UNIX but the modem on the UNIX side would just sit there. It turned out to be a problem with the HST modem settings. I had to disable the error control check with the HST command "at&m0". This solved my problem very quickly. Try it out, it may help out..... _______ ______ Matthew G. Hetman ( / ) / / / / ____ AT&T Bell Labs / / / __ / / /---/ / ____ __ __ (201) 386-7259 / / (___/-/__/ /____ / (___()__/____///__/-/__/ /_ attbl!whscad1!mgh or attbl!whuts!mgh1