hawk@pnet01.cts.com (John Anderson) (09/26/90)
Could whoever (or anyone else if you know) posted the info about the ST-506 to SCSI interface for hard disks please post the info again. Something screwed up (probably me) and I lost the message. Could you please give the name, address, phone number, and any other info about the interface that you might think I would need. Thank you ahead of time.
slfields@uokmax.ecn.uoknor.edu (Scott L Fields) (09/26/90)
In article <4650@crash.cts.com> hawk@pnet01.cts.com (John Anderson) writes: > > Could whoever (or anyone else if you know) posted the info about the ST-506 >to SCSI interface for hard disks please post the info again. Something {I'm nitpicking so bear with me} A ST-506 to SCSI interface would be extremely complicated and unneccesary. Imagine having to interpret head step lines, and read/write commands in real time and sending the apprpriate SCSI command to the drive. And sending the data in MFM or RLL as the case may be. A SCSI to ST-506 interface would be a lot easier to build and quite a few are on the market. Again, I am just nit-picking. No malice is intended what so ever.