MAILER-DAEMON@flash.lakeheadu.ca (01/19/91)
----- Transcript of session follows -----
Connected to thunder:
>>> DATA
<<< 554 <amiga-relay@ee.udel.edu>... Address too long
554 thunder!tjhayko... Service unavailable
----- Unsent message follows -----
Return-Path: <amiga-relay@ee.udel.edu>
Received: by flash.LakeheadU.Ca (4.0/SMI-3.2)
id AA09639; Fri, 18 Jan 91 17:16:12 EST
Date: Fri, 18 Jan 91 17:16:12 EST
Subject: 25Pin to 50Pin Header Cables ...
Sender: amiga-hardware-relay-request@udel.edu
To: amiga-hardware-relay@udel.edu
Newsgroups: comp.sys.amiga.hardware
Message-Id: <42111@nigel.ee.udel.edu>
From: Lou Williams <lou@vaxsc.niehs.nih.gov>
To whoever posted a request for 25 pin to 50 pin SCSI drive
cables. I dont know if this is what you need,
but here's a vector in that direction.There's a place in New York called
Inc.They advertise a cable,
External Seagate Hard Drive with these
connectors: D25M to 50FH. If I read that correctly (D-Sub
25 male to 50 Female Header) that should be what you're looking
for.
Hope it helps.
p.s. #include <std.disclaimer>,
I dont represent them,
I just need parts for my C64 occasionally.------------------------------
Research Triangle Park,
NC ---------------------------------------------------------------- -Som
you have to make others feel bad,
and I'm tired of making others feel good about themselves.-Homer Simpson
since I get it via relay, so reply to me directly.
QUITMAILER-DAEMON@flash.lakeheadu.ca (01/22/91)
----- Transcript of session follows -----
554 amiga-relay@ee.udel.edu
... Unbalanced '<'
554 thunder!tjhayko... Unbalanced '<'
554 thunder!tjhayko... Unbalanced '<'
Connected to thunder:
>>> DATA
<<< 554 <amiga-relay@ee.udel.edu>... Unbalanced '<'
554 thunder!tjhayko... Service unavailable
----- Unsent message follows -----
Return-Path: <amiga-relay@ee.udel.edu>
Received: by flash.LakeheadU.Ca (4.0/SMI-3.2)
id AA06874; Mon, 21 Jan 91 22:38:39 EST
Date: Mon, 21 Jan 91 22:38:39 EST
Subject: Re: Sapphire
Sender: amiga-hardware-relay-request@udel.edu
To: amiga-hardware-relay@udel.edu
Newsgroups: comp.sys.amiga.hardware
Message-Id: <42382@nigel.ee.udel.edu>
From: "Jim Karczewski, Programmer -- TTR Development, Inc." <JK829055@pucal.
+ bitnet>
Sapphire gives a 2.4 MIPS rating. It is the equivalent of a
2500 without the 32 Bit memory. The reason 32 Bit memory was not added was
to make an Inexpensive Accellerator that alot of people can afford.
There might be a '030 version with 32 Bit memory... But like I said the main
purpose was to give an increase in speed for a decent price.. Sapphire
can be found at dealers for about $340 I beleive... I really Haven't checked..
Since I put mine In I have not had hardly any Compatibility problems with
games... I Played Pirates, The Killing Game Show, and A couple of others
on it with no problem, and the speed really does help when Compiling those BIG
C programs.. and Un-Lharcing 600K Files.
Jim Karczewski
Programmer
TTR Development, Inc.
PS. You can contact TTR Development for more info...
Voice: (608)277-8071 BBS: (608)277-8072 FAX: (608)277-8073
QUITMAILER-DAEMON@flash.lakeheadu.ca (01/23/91)
----- Transcript of session follows -----
554 amiga-relay@ee.udel.edu
... Unbalanced '<'
554 thunder!tjhayko... Unbalanced '<'
554 thunder!tjhayko... Unbalanced '<'
Connected to thunder:
>>> DATA
<<< 554 <amiga-relay@ee.udel.edu>... Unbalanced '<'
554 thunder!tjhayko... Service unavailable
----- Unsent message follows -----
Return-Path: <amiga-relay@ee.udel.edu>
Received: by flash.LakeheadU.Ca (4.0/SMI-3.2)
id AA13579; Tue, 22 Jan 91 23:27:14 EST
Date: Tue, 22 Jan 91 23:27:14 EST
Subject: Program save formats...
Sender: amiga-programmer-relay-request@udel.edu
To: amiga-programmer-relay@udel.edu
Newsgroups: comp.sys.amiga.tech
Message-Id: <42504@nigel.ee.udel.edu>
From: "Jim Karczewski, Programmer -- TTR Development, Inc." <JK829055@pucal.
+ bitnet>
I am writing a program which plots data in 3 Dimensions.. I would like
to support alot of different outputs.. but I do not know the different output
formats (Like LightWave, Imagine, and some of the other 3D modeling programs
out there) I have found just one output format so far and that is the format for
Sculpt Animate 4D... If anyone knows where to get 3D Modeling Save formats
Please let me know!
Thanks,
Jim Karczewski
Programmer
TTR Development, Inc.
QUITMAILER-DAEMON@flash.lakeheadu.ca (01/26/91)
----- Transcript of session follows -----
554 amiga-relay@ee.udel.edu
... Unbalanced '<'
554 thunder!tjhayko... Unbalanced '<'
554 thunder!tjhayko... Unbalanced '<'
Connected to thunder:
>>> DATA
<<< 554 <amiga-relay@ee.udel.edu>... Unbalanced '<'
554 thunder!tjhayko... Service unavailable
----- Unsent message follows -----
Return-Path: <amiga-relay@ee.udel.edu>
Received: by flash.LakeheadU.Ca (4.0/SMI-3.2)
id AA25068; Fri, 25 Jan 91 12:40:50 EST
Date: Fri, 25 Jan 91 12:40:50 EST
Subject: 2091 Problems...
Sender: amiga-hardware-relay-request@udel.edu
To: amiga-hardware-relay@udel.edu
Newsgroups: comp.sys.amiga.hardware
Message-Id: <42774@nigel.ee.udel.edu>
From: "Jim Karczewski, Programmer -- TTR Development, Inc." <JK829055@pucal.
+ bitnet>
I have been having problems lately using my 2091 with my
Quantum 40 Meg (the stock on the old 2000HD's) and a Seagate 296N. When
I am doing something that writes on the Amiga side to the quantum, and
try writing at the same time to the 296N partition for my AT Bridge,
the drives both lock up on me. Causing me no alternative but
to re-boot since the drives are locked... What could be causing this problem?
Both drives Have different ID numbers, so thats not it... I don't know
what could be causing it...
Jim Karczewski
Programmer
TTR Development, Inc.
JK829055@pucal.bitnet
QUIT