sutedjok@polyslo.UUCP (Sukanto Tedjokusuma) (10/28/87)
I have an IBM-AT clone (Baby 286) which run at either 8 or 10 MHz.
The problem is that the clock is running faster than it supposed to be.
It is 1.4 times faster when it run at 10 MHz (I haven't measured with
8 MHz). But the internal system clock is just fine, so everything is
okay when I start to turn on my computer. The problem also appear when
I run Microsoft Xenix.
I wonder if this problem is a hardware problem or software problem (BIOS).
By the way, the BIOS I am using is a Phoenix BIOS dated 1985.
Any idea or suggestion will be greatly appreciated.
Sukanto.
--
Sukanto Tedjokusuma 106 Mustang Dr. #203,
California Polytechnic State Univ. San Luis Obispo, CA 93401
...!uunet!lll-winken!csustan!polyslo!sutedjok (805) 546-9131
...!{ihnp4,hplabs}!csun!polyslo!sutedjok