pcl@ihlpf.ATT.COM (Liu) (07/29/88)
I am in the process of hooking up the 9" Sony color monitor that came from an Apricot PC (made in England). After initial hookup is done (needed a gender changer), I can barely see the text 'cause they are very skewed. An Apricot dealer in Ontario gave me the pin layout for that monitor. Now I need to verify whether they are pin-to-pin compatible. Otherwise I need to make a custom cable for this. Could someone on the netland detail the pin layout of the 9-pin CGA connector? Thanks in Advance! ihnp4!ihlpf!pcl
schuster@dasys1.UUCP (Michael Schuster) (08/01/88)
In article <5475@ihlpf.ATT.COM> pcl@ihlpf.ATT.COM (Liu) writes: >Could someone on the netland detail the pin layout of the 9-pin CGA connector? My pleasure. The pinouts are as follows: 1 ground 2 ground 3 red 4 green 5 blue 6 + intensity 7 (reserved) 8 + horizontal drive 9 vertical drive Source: IBM Technical Reference, Options and Adaptors, Volume 2 -- l\ /l' _ Mike Schuster {sun!hoptoad,cmcl2!phri}!dasys1!schuster l \/ lll/(_ Big Electric Cat schuster@dasys1.UUCP l lll\(_ New York, NY USA DELPHI,GEnie:MSCHUSTER CIS:70346,1745
leonard@bucket.UUCP (Leonard Erickson) (08/01/88)
In article <5475@ihlpf.ATT.COM> pcl@ihlpf.ATT.COM (Liu) writes:
<Could someone on the netland detail the pin layout of the 9-pin CGA connector?
1 ground
2 ground
3 red
4 green
5 blue
6 intensity
7 reserved
8 horizontal drive
9 vertical drive
--
Leonard Erickson ...!tektronix!reed!percival!bucket!leonard
CIS: [70465,203]
"I used to be a hacker. Now I'm a 'microcomputer specialist'.
You know... I'd rather be a hacker."