[comp.sys.ibm.pc] help with pc/ip please

ajoseph@pyr1.cs.ucl.ac.uk (08/24/88)

Hi Folks I wonder if anyone can help me. I'm trying to compile pc/ip
using MSC 4, I've got things to the state where all the libraries
compile without any complaints and I've compiled tftp (by the way
I'm ing a 3COM card in a PC AT). Now there is a problem with
address decoding (and possibily with what happens with incoming
packets) what happens is that the destination address is munged
so that what should be an address of 128.16.8.6 comes out as
8.6.10.140 or even 8.6.10.182 without apparent cause. Now I know all
this stuff should work, so I assume I've done something silly while
I've been fiddling, one other reason while all things may not be as
they should is that I think some of the bits of the source may be
from the c86 version (for all that I know the two may be compatible
but I doubt it). Anyway help would be appreciated and the location
of a complete source that is known to compile and work would also
not go amiss (assuming i get actually get hold of it). 
Thanks 
     Adrian