yuan@uhccux.uhcc.hawaii.edu (Yuan Chang) (09/14/88)
Hi. I have a Canon 5201 floppy drive which stopped functioning a while ago. It's functioning just weird enough at the moment that I thought there might be a way to salvage it. The drive is currently installed as drive A: on an AT clone, with CMOS RAM properly set for it. The connector for drive B: is left empty. Anyway, when I access drive A: in anyway, the drive motor spins, but the select light doesn't come on. It'll not read nor write onto the drive. If I access B: (this is after I set up my CMOS RAM for one-drive system), the select light will come on, but the motor won't start. Anybody seen something like this, with possibly a cure? 8) Thanks... -- Yuan Chang "What can go wrong, did" UUCP: {ihnp4,uunet,ucbvax,dcdwest}!ucsd!nosc!uhccux!yuan ARPA: uhccux!yuan@nosc.MIL "Wouldn't you like to INTERNET: yuan@uhccux.UHCC.HAWAII.EDU be an _A_m_i_g_o_i_d too?!?"