lane@dalcs.UUCP (John Wright/Dr. Pat Lane) (10/20/88)
I plan to replace the 1.2Meg drive A in my AT clone with a 360K drive and
use the 1.2Meg drive as drive B. I have installed drives in XT's...i know
about the cabling twist vs. jumper setting methods for telling the drive
whether it is A: or B: and I know about using DRIVPARM= in DOS 3.20 or later
to tell DOS what size each drive is. Is there more to it than that?
Someone mentioned something about "termination" for the last drive on the
cable...what might that be about? Will I have to use DRIVPARM if I do the
SETUP appropriately? Thanks for any help.
--
John Wright ///////////////// Phone: 902-424-3805 or 902-424-6527
Post: c/o Dr Pat Lane, Biology Dept, Dalhousie U, Halifax N.S., CANADA B3H-4H8
Cdn/Bitnet: lane@cs.dal.cdn Arpa: lane%dalcs.uucp@uunet.uu.net
Uucp: lane@dalcs.uucp or {uunet,watmath,utai,garfield}!dalcs!lane