drf@ihlpa.ATT.COM (Feliciano) (11/16/88)
I am having printer problems and hope someone can shed a little light on the problem. I have a Radio Shack model DMP130 printer hooked up to an AT&T 6300 PC. The problem entails Ctrl-Prt Sc (continuous screen print) not working from MS-DOS while Prt Sc (screen dump) has no problems. Interestingly, I have *no* problem with Ctrl-Prt Sc while running CTRM *unless* I escape to MS DOS using F4- once given the DOS prompt, Ctrl-Prt Sc results in an error in writing to the printer with the notorious abort, retry, ignore message. A continuous screen print does not work with Lotus 123, but *does* work with Sideways 123 and Microsoft Word! I would appreciate any insight or, for that matter, speculation. Thanks in advance. Dave Feliciano ..!ihnp4!ihlpa!drf AT&T Bell Labs IH 6N-442 (312) 979-3445
Dan.Husk@p9.f1.n360.z1.uucp (Dan Husk) (11/17/88)
> From: drf@ihlpa.ATT.COM (Feliciano) Date: 15 Nov 88 22:53:18 GMT > Organization: AT&T Bell Laboratories - Naperville, Illinois Message-ID: > <10437@ihlpa.ATT.COM> Newsgroups: > att.sys.pc6300,comp.sys.att,comp.sys.ibm.pc > > > > > I am having printer problems and hope someone can shed a little light on Feliciano..Make sure that you have loaded "GRAPHICS.COM" before you do any dumps. Dan (-| -- Dan Husk - via FidoNet node 1:135/3 Medical Software Exchange BBS (305) 325-8709 UUCP: ...uunet!gould!umbio!medsoft!360!1.9!Dan.Husk ARPA: Dan.Husk@p9.f1.n360.z1.uucp
billq@ihlpe.ATT.COM (Quayle) (11/19/88)
I've got a similar problem with these printers. If anyone has an insight on this, please post.