[comp.sys.ibm.pc] FOR SALE/TRADE: MEMORY + IBM PC/AT clone parts

wolfordj@ihlpa.ATT.COM (452is-Wolford) (02/10/89)

I have the following items for-sale or trade after doing a upgrade
on my running AT clone:

WD1003-RA2 - This is the standard WD FD/HD controller for AT, but
	supports RLL type drives. 
	Supports Single, double, and high density floppy drives.
	Paid $150, now $75

12 MHZ 80286 Beaver Computer Mother board, 
	- Manufactured in 3/88, purchased in 6/88.
	- AWARD BIOS.
	- 0/1 Wait state jumper 
	- Bus speed 8/12 MHZ jumper
	- Boot speed 6/12 MHZ jumper
	- 80287 socket with speed select of 6/8/10 MHZ
	- 8 slots, 6-16bit, 2-8bit
	- Standard AT hole size.
	- 512K / 640K / 640K and 384 extended memory, jumper select.
	- Parity jumper select.
	- Supports both 5 1/4" and 3 1/2" drives
	- Supports 360K / 720K / 1.2MB and 1.44MB floppy drives in bios.
	- 47 Disk drive types in the CMOS setup drive table.
	- Machine pin sockets for the memory for reliable memory.

	Original $400 0K, now 	$200 with 0K memory
				$500 with 1024K memory

36 256Kx1 120ns DRAMS, ZIP pack, please note ZIP, NOT DIP.
	$200

1 SCSI BiTech controller card:
	Supports SCSI, and ST506 bridge controllers.
	Supports SCSI tape drives.
	TWO SCSI busses for high performance disk to tape
		backups.
	Comes with software to format and partition drives.
	Comes with software to support backups using tape drives.
	Socket for WD37C65 Floopy disk controller.
	Socket and ROM to support booting off of SCSI drive.
	Only 2 Months old.
	Upgraded to ESDI controller.
	Original $250, now $150

WD1003-WA2 - This is the IBM PC/AT standard controller, supports
	2 MFM Hard disks
	2 single / double / high density floppies.
	$75 only if I get a ESDI controller or I sell everything and
		can buy one.  Interested send email.

LNW-80 Model II
	Z80 4 MHZ
	128K
	TRS-80 compatible.
	NEWDOS-80 or CPM
	2 - 80 Track drives.
	1 - Monichrome NEC monitor
	1 - Color IBM CGA compatible connector.
	LOTS and LOTS of software, 100's of disks

	WILL trade only

What do I want: Any of the following:
	$$
	Hard disks, prefer ESDI, but larger ST506 (ie > 40MB) will also do.
	ESDI disk controller.
	256K X 9 SIMM modules (120ns min).
	1MB X 9 SIMM models (120ns min).
	Roller ball, Microsoft mouse compatible.
	HP Laser Jet II accessories (paper bins, font / ram cartridges)
	Digitizer
	3 1/2" 1.44MB floppy drive.
	Any thing else dealing with computers


Jeff Wolford
312-979-0430
att!iwsag!jww
att!ihlpa!wolfordj

harvard-+
	|
ucbvax--+---- att --+ iwsag!jww
	|
decvax--+