meyer@s.cs.uiuc.edu (02/07/89)
Re: PGA Graphics w/ MSC 5.1 Can anyone out there give me a clue as to how to use the IBM PGA graphics board with MSC 5.1. Of all the modes supported by the graphics library, the PGA mode(s) are absent. I know that the adapter is "smart", but I have no idea of how to use it or how to interface with the adapter. If someone could give me a few hints, or point me in the right direction, I'd be forever grateful. (I seem to recall an article in one of the popular PC-type magazines recently, but I can't track it down either.) If you can help, respond here or e-mail me and I'll summarize for others in my predicament. Don Meyer University of Illinois, Urbana-Champaign meyer@s.cs.uiuc.edu
keithe@tekgvs.LABS.TEK.COM (Keith Ericson) (02/14/89)
In article <213400025@s.cs.uiuc.edu> meyer@s.cs.uiuc.edu writes: >Re: PGA Graphics w/ MSC 5.1 >Can anyone out there give me a clue as to how to use the IBM PGA graphics >board with MSC 5.1. Of all the modes supported by the graphics library, the >PGA mode(s) are absent. >I know that the adapter is "smart"... The controller may be "smart," but USING it probably isn't. The lack of graphics library support should give you an idea of the popularity of the PGA. kEITH