nobody@tekecs.GWD.TEK.COM (-for inetd server command) (02/28/89)
I just bought a used multifunction card without documentation. I got
the floppy controller and one of the serial ports to work which is
fine for now, but I'd like to use some of it's other features. So my
question is... Does anyone out there have a pinout list for a Ceptre
AC-103XF Multi-IO/Floppy Controller board?
I'm specifically interested in the printer port and the ribbon cable
connectors at the top of the board for the second serial port and the
game port. It didn't come with the ribbon cable that connects to the
top two sets of pins and so I'm trying to make my own. The ribbon
connectors are marked Com X (J1) and Game (J2). If anyone has a
manual I'd even pay for copying. (Drop an e-mail note first, though.)
I'm also interested in knowing what the dip switches control.
Since I suspect this board is a Taiwan clone, the pinout for the
printer port on a similar Jameco or Jade computer board will probably
help me figure it out.
Thanks in advance, for any help that you folks can give.
Stank
US Mail: Stan Kalinowski, Tektronix, Inc.
Information Display Group, Interactive Technologies Division
PO Box 1000, MS 61-028, Wilsonville OR 97070 Phone:(503)-685-2458
uucp: {ucbvax,decvax,allegra,uw-beaver}!tektronix!orca!stank