[comp.sys.ibm.pc] Port address problem on an AT

marquis@qal.qal.berkeley.edu (Roger Marquis) (03/10/89)

  My recently purchased bus modem is installed on com4 as I already have
a com1-3.  The problem is that the Sidekick dialer will only talk to
com1 or com2.  Is there 1) a way to readdress com2 to com4, 2) patch
sidekick to use com4 or, 3) install this Everex bus modem on com2
without taking out a serial port?
   
    Thanks,
      Roger Marquis   (marquis@ucbqal.bitnet)