rkaplan@medsoft.uucp (Richard Kaplan) (03/13/89)
I'd appreciate any advice anyone can give me on configuring my system so my hard drives can begin with C:. My peripherals include: * 360K 5 1/4" drive * 720K 3 1/2" drive * Colorado Memory Tape Backup (must be physically assigned as drive B:) All 3 of the above run off of a Jameco 4-drive floppy controller. * 130 Mb hard drive divided into 5 partitions I don't particularly care what drive letters are assigned to my floppies, but I need my hard drive to be C: through G:. Right now I'm using a whole bunch of SUBST statements, but I don't like this approach, as it is incompatible with some software. I guess my basic question is: How do I assign my hard drive to be C: through G: while the 3 peripherals attached to the floppy controller as either split up (A, B, and H) or assigned consecutively after G (H, I, J)? -- Richard Kaplan - via FidoNet node 1:135/3 Medical Software Exchange BBS (305) 325-8709 UUCP: ...uunet!gould!umbio!medsoft!rkaplan ARPA: rkaplan@medsoft.uucp